HL-9108L Limit switch
Specification:
|
Rated voltage(V) |
Non-inductive load(A) |
Inductive load(A) |
||
|
Resistive load |
Lamp load |
Inductive load |
Motor load |
|
|
N.C. N.O. |
N.C. N.O. |
N.C. N.O. |
N.C. N.O. |
|
|
125VAC 250VAC 480VAC |
10 10 3 |
3 1.5 2.5 1.25 1.5 0.75 |
10 10 2.5 |
5 2.5 3 1.5 1.5 0.75 |
|
8VAC 14VDC 30VDC 125VDC 250VDC |
10 10 8 0.5 0.25 |
3 1.5 3 1.5 3 1.5 0.4 0.2 |
6 6 6 0.05 0.03 |
6 5 6 5 5 2.5 0.05 0.03 |
Characteristics:
| Operating speed | 0.01mm to 50cm/sec(at pin plunger) |
| Operating frequency | 120 operation/min |
| Contact resistance | 25mΩ max.(initial) |
| Insulation resistance | 100mΩ min.(at 500 VDC) |
| Dielectric strength | 1,000VAC,50/60Hz for 1 minute between non-continuous terminals 2,000VAC,50/60Hz for 1 minute between current carrying and non-current-carrying parts and between each terminal and ground |
| Vibration | Malfunction durability:10 to 55Hz,1.5mm double amplitude |
| Shock | Mechanical durability:1,000m/s2(approx.100G`S)
Malfunction durability:300m/s(approx.30G`S) |
| Ambient temperature | Operating : -10 to +70 |
| Humidity | 95% RH max.(at +20 to +35) |
| Service life | Mechanically:10,000,000 operations min.(at rated or value)
Electrically:500,000 operation min. |
| Degree of protection | IEC:IP65 |
